AppleKrate
Sep 16, 12:14 PM
That just means you'll get the updated MBP's later than us here in the States. :p
Naturally, it takes them a while to convert them to Right Hand Drive ;)
Naturally, it takes them a while to convert them to Right Hand Drive ;)
Tomorrow
May 3, 09:02 PM
Semantics. Your argument boils down to the pain of change.
The cost of change. There's a difference.
Again, the real crux of your argument is that people are 'comfortable' with what they already know.
No, once again, it's not about comfort; it's about experience. I learned mostly SI units when I was in college, I'm quite comfortable with using those units - but the industry doesn't use those units. I learned, and became an expert in, the units used by the industry. You would ask millions of engineers, technicians, etc. to throw away years or even decades of experience simply to change a system that isn't broken.
Yes, it's a system that has its roots in the past, but the system still works. There's no compelling reason to change it. There's no efficiency to be gained.
The cost of change. There's a difference.
Again, the real crux of your argument is that people are 'comfortable' with what they already know.
No, once again, it's not about comfort; it's about experience. I learned mostly SI units when I was in college, I'm quite comfortable with using those units - but the industry doesn't use those units. I learned, and became an expert in, the units used by the industry. You would ask millions of engineers, technicians, etc. to throw away years or even decades of experience simply to change a system that isn't broken.
Yes, it's a system that has its roots in the past, but the system still works. There's no compelling reason to change it. There's no efficiency to be gained.
SPUY767
Aug 7, 05:20 PM
Thanks for raising the noise question. My thoughts exactly. Since there wasn't a case redesign, I suspect the noise specs to be similar to G5.
Anyone?
I'd say less. The fans in the G5's had to work like dogs because the chips were actually overclocked and were pumping out a lot of heat. The woodcrests should run quite a bit cooler, and the noise level should be less. Notice from the internal views that there are fewer fans than appear on the G5?
Anyone?
I'd say less. The fans in the G5's had to work like dogs because the chips were actually overclocked and were pumping out a lot of heat. The woodcrests should run quite a bit cooler, and the noise level should be less. Notice from the internal views that there are fewer fans than appear on the G5?
Piggie
Apr 23, 06:49 PM
Piggie, you're my favourite!
You were quite concerned about how far behind Tegra 2 the iPad 2's specs were going to be and then when the tables turn in Apple's favour for specs it's, "but why, who needs this?"
Are you trying to say that having a higher resolution wouldn't be beneficial? Especially in light of your comment about the iPad's resolution.
Note: what "I" want, and what I think Apple's targeted consumer group want are to entirely different things.
Myself, I see a computer as a box of bits. I really don't care what the "box" looks like, it's just a box, it's what's on screen that matters to me.
I would NEVER EVER compromise what a computer can do to make it fit inside a pretty box, which is why I can never like an iMac as it's just fundamentally a bad design, cramming a lot inside a tight hot case just to make it look pretty.
I don't care who makes a product, and I have no brand loyalty at all.
I will go for the best I think I can find/afford at time of purchase based upon the criteria that matter to me.
Case thinness, material it's made from, colour, etc are all way down on my list of importance.
But then, Apple don't generally make anything for me due to this.
The current iPad2 being the exception as, at the moment I'm more than happy to admit that despite the bad lockdowns Apple has applied to the iPad, it's technically the best tablet at the moment.
I will draw back that statement a little as it can't read memory cards and lacks output ports and is lumbered with iTunes, but putting those negatives to one side, it's positives in speed and quality outweigh those points at the moment.
You were quite concerned about how far behind Tegra 2 the iPad 2's specs were going to be and then when the tables turn in Apple's favour for specs it's, "but why, who needs this?"
Are you trying to say that having a higher resolution wouldn't be beneficial? Especially in light of your comment about the iPad's resolution.
Note: what "I" want, and what I think Apple's targeted consumer group want are to entirely different things.
Myself, I see a computer as a box of bits. I really don't care what the "box" looks like, it's just a box, it's what's on screen that matters to me.
I would NEVER EVER compromise what a computer can do to make it fit inside a pretty box, which is why I can never like an iMac as it's just fundamentally a bad design, cramming a lot inside a tight hot case just to make it look pretty.
I don't care who makes a product, and I have no brand loyalty at all.
I will go for the best I think I can find/afford at time of purchase based upon the criteria that matter to me.
Case thinness, material it's made from, colour, etc are all way down on my list of importance.
But then, Apple don't generally make anything for me due to this.
The current iPad2 being the exception as, at the moment I'm more than happy to admit that despite the bad lockdowns Apple has applied to the iPad, it's technically the best tablet at the moment.
I will draw back that statement a little as it can't read memory cards and lacks output ports and is lumbered with iTunes, but putting those negatives to one side, it's positives in speed and quality outweigh those points at the moment.
thegreatluke
Aug 7, 07:37 PM
Newegg has 512's for about 100 and 1GB chips for $200. Way cheaper than apple's upgrades. And they are retial crucial chips...
Hope that helps. Also, I don't know about the 750GB HD's - apple only offers 500GB drives - there may be a reason for that...
Are they fully buffered 667 MHz ECC RAM? :)
Hope that helps. Also, I don't know about the 750GB HD's - apple only offers 500GB drives - there may be a reason for that...
Are they fully buffered 667 MHz ECC RAM? :)
LucidPsychosis
May 9, 01:54 PM
Oh dear god I hope this turns out to be true. I really want an @me e-mail address, but I'm not willing to pay for it :p
Brometheus
Apr 25, 10:26 AM
yes there is a problem. because it's unencrypted and everyone with access to your phone can read the information. the software tool they published showed my travel of the last 6 month quite accurately.
I don't want someone picking up my phone from my desk at work and find out what trips to what company I did. (it works internationally btw)
also I don't think the IRS or other tax collection agencies need to know when I was where.:D
Fair enough, but hardly the same as Apple acting as big brother (not that you made that claim).
I don't want someone picking up my phone from my desk at work and find out what trips to what company I did. (it works internationally btw)
also I don't think the IRS or other tax collection agencies need to know when I was where.:D
Fair enough, but hardly the same as Apple acting as big brother (not that you made that claim).
codyc815
Apr 26, 04:50 PM
However Apple lost my custom today. All these stories about putting the release date back and rumors about a 'small' update.....
Wth, Apple didn't push a release date back, there was never a release date. Just because you assume they'll introduce something the exact same time they did last year and they don't, that's not their fault.
Wth, Apple didn't push a release date back, there was never a release date. Just because you assume they'll introduce something the exact same time they did last year and they don't, that's not their fault.
MacAddict1978
Apr 25, 10:46 AM
And they can get that data directly from the telecos without access to your phone. I highly doubt this database exists for that purpose when there are much more seamless/invisible ways to get the information. (Waits patiently for someone to down vote this reply since I mentioned the government getting information from the telcos...ignoring the fact I never took a position on it personally. So much for staying informed.)
http://news.cnet.com/8301-31921_3-20056344-281.html
No... they use a third party company to hack the phone, and have been for the past year. It's funny this just not became newsworthy as the cops have been on this since the 3GS and have convicted people with the location data. Sorry about your alibis.
http://news.cnet.com/8301-31921_3-20056344-281.html
No... they use a third party company to hack the phone, and have been for the past year. It's funny this just not became newsworthy as the cops have been on this since the 3GS and have convicted people with the location data. Sorry about your alibis.
Eidorian
Mar 29, 02:38 PM
Why in limbo? The "phone part" of the Iphone is widely acknowledged to be craptastic.True enough, I am still in search of a mobile internet device with a camera. The iPad 3G comes close except in price, size, and the mediocre camera.
I am not willing to frivolously spend money on such an endeavor just to return it to the store. I already feel guilty enough about my many product returns to the point where I believe my card number is just shy of being blacklisted. Thank god for cash.
I have a good inner circle of friends but our jobs and relationships are really killing what free time we have to game. That limits my desire to an Alienware M11x to have something portable for games.
The internet just needs to get to the point where it really is everywhere as a public service before I really buy into it. Sadly we are not there yet.
I am not willing to frivolously spend money on such an endeavor just to return it to the store. I already feel guilty enough about my many product returns to the point where I believe my card number is just shy of being blacklisted. Thank god for cash.
I have a good inner circle of friends but our jobs and relationships are really killing what free time we have to game. That limits my desire to an Alienware M11x to have something portable for games.
The internet just needs to get to the point where it really is everywhere as a public service before I really buy into it. Sadly we are not there yet.
inkswamp
Sep 11, 04:43 AM
Round wheels on those wheelbarrows? You were lucky!
We only 'ad square wheels on our wheelbarrows an' they were made out of lead...
Ooooh... how we used to dream of wheels made out of lead. Ours were made of depleted uranium. :eek:
We only 'ad square wheels on our wheelbarrows an' they were made out of lead...
Ooooh... how we used to dream of wheels made out of lead. Ours were made of depleted uranium. :eek:
Xtremehkr
Apr 7, 09:35 AM
RIM was the smartphone market for a brief period of time, they really should be doing better than what they are right now.
RIM didn't have any vision, though, and were eclipsed by Apple and Google.
I owned a BB Storm and it was a piece of junk, the Torch fell flat and now the Playbook has been delayed.
I wonder who is going to buy RIM out, they are in desperate need of a hit product. RIM needs a halo product as badly as Apple did before the iPod came out.
RIM didn't have any vision, though, and were eclipsed by Apple and Google.
I owned a BB Storm and it was a piece of junk, the Torch fell flat and now the Playbook has been delayed.
I wonder who is going to buy RIM out, they are in desperate need of a hit product. RIM needs a halo product as badly as Apple did before the iPod came out.
Jelite
Mar 29, 11:50 AM
Why not just use an app that lets you stream from your computer at home? why pay for online storage when you already have it?
CalBoy
May 3, 03:39 PM
I see no reason why 99, 99.5, and 100 are easier to track than 37.2, 37.5, and 37.7. As you said, we accept body temp to be 98.6 and 37.0 in Celsius. If decimals are difficult to remember, then clearly we should pick the scale that represents normal body temp as an integer, right? ;)
It doesn't matter what normal body temperature is because that's not what people are looking for when they take a temperature; they're looking for what's not normal. If it can be helped, the number one is seeking should be as flat as possible.
There is a distinctive quality about 100 that is special. It represents an additional place value and is a line of demarcation for most people. For a scientist or professional, the numbers seem the same (each with 3 digits ending in the tenths place), but to the lay user they are very different. The average person doesn't know what significant digits are or when rounding is appropriate. It's far more likely that someone will falsely remember "37.2" as "37" than they will "99" as "98.6." Even if they do make an error and think of 98.6 as 99, it is an error on the side of caution (because presumably they will take their child to the doctor or at least call in).
I realize this makes me seem like I put people in low regard, but the fact is that most things designed for common use are meant to be idiot-proof. Redundancies and warnings are hard to miss in such designs, and on a temperature scale, one that makes 100 "dangerous" is very practical and effective. You have to keep in mind that this scale is going to be used by the illiterate, functionally illiterate, the negligent, the careless, the sloppy, and the hurried.
The importance of additional digits finds its way into many facets of life, including advertising and pricing. It essentially the only reason why everything is sold at intervals of "xx.99" instead of a flat price point. Marketers have long determined that if they were to round up to the nearest whole number, it would make the price seem disproportionately larger. The same "trick" is being used by the Fahrenheit scale; the presence of the additional digit makes people more alarmed at the appropriate time.
Perhaps your set of measuring cups is the additional piece of equipment. Indeed you wouldn't need them. For a recipe in SI, the only items you would need are an electronic balance, graduating measuring "cup," and a graduated cylinder. No series of cups or spoons required (although, they do of course come in metric for those so inclined).
Of course any amateur baker has at least a few cups of both wet and dry so they can keep ingredients separated but measured when they need to be added in a precise order. It just isn't practical to bake with 3 measuring devices and a scale (which, let's be real here, would cost 5 times as much as a set of measuring cups).
This also relies on having recipes with written weights as opposed to volumes. It would also be problematic because you'd make people relearn common measurements for the metric beaker because they couldn't have their cups (ie I know 1 egg is half a cup, so it's easy to put half an egg in a recipe-I would have to do milimeter devision to figure this out for a metric recipe even though there's a perfectly good standard device for it).
It might seem that way to you, but the majority of the world uses weight to measure dry ingredients. For them it's just as easy.
Sure when you have a commercial quantity (which is also how companies bake in bulk-by weight), but not when you're making a dozen muffins or cupcakes. The smaller the quantity, the worse off you are with weighing each ingredient in terms of efficiency.
Why would you need alternative names? A recipe would call for "30ml" of any given liquid. There's no need to call it anything else.
So what would you call 500ml of beer at a bar? Would everyone refer to the spoon at the dinner table as "the 30?" The naming convention isn't going to disappear just because measurements are given in metric. Or are you saying that the naming convention should disappear and numbers used exclusively in their stead?
Well, no one would ask for a 237ml vessel because that's an arbitrary number based on a different system of units. But if you wanted, yes, you could measure that amount in a graduated measuring cup (or weigh it on your balance).
In that case, what would I call 1 cup of a drink? Even if it is made flat at 200, 250, or 300ml, what would be the name? I think by and large it would still be called a cup. In that case you aren't really accomplishing much because people are going to refer to it as they will and the metric quantity wouldn't really do anything because it's not something that people usually divide or multiply by 10 very often in daily life.
I suspect people would call it a "quarter liter," much like I would say "quarter gallon."
No, that would be 1/4 of a liter, not 4 liters. I'm assuming that without gallons, the most closely analogous metric quantity would be 4 liters. What would be the marketing term for this? The shorthand name that would allow people to express a quantity without referring to another number?
And no, you wouldn't call 500ml a "pint" because, well, why would you? :confused:
Well I'm assuming that beer would have to be served in metric quantities, and a pint is known the world over as a beer. You can't really expect the name to go out of use just because the quantity has changed by a factor of about 25ml.
...But countries using SI do call 500ml a demi-liter ("demi" meaning "half").
Somehow I don't see that becoming popular pub lingo...
This is the case with Si units as well. 500, 250, 125, 75, etc. Though SI units can also be divided by any number you wish. Want to make 1/5 of the recipe? ...Just divide all the numbers by five.
Except you can't divide the servings people usually take for themselves very easily by 2, 4, 8, or 16. An eighth of 300ml (a hypothetical metric cup), for example, is a decimal. It's not very probable that if someone was to describe how much cream they added to their coffee they'd describe it as "37.5ml." It's more likely that they'll say "1/4 of x" or "2 of y." This is how the standard system was born; people took everyday quantities (often times as random as fists, feet, and gulps) and over time standardized them.
Every standard unit conforms to a value we are likely to see to this day (a man's foot is still about 12 inches, a tablespoon is about one bite, etc). Granted it's not scientific, but it's not meant to be. It's meant to be practical to describe everyday units, much like "lion" is not the full scientific name for panthera leo. One naming scheme makes sense for one application and another makes sense for a very different application. I whole heartedly agree that for scientific, industrial, and official uses metric is the way to go, but it is not the way to go for lay people. People are not scientists. They should use the measuring schemes that are practical for the things in their lives.
Not that OS X Panthera Leo doesn't have a nice ring to it, of course. ;)
No, but it is onerous for kids to learn SI units, which is a mandatory skill in this global world. Like I said, why teach kids two units of measure if one will suffice?
It's onerous to learn how to multiply and divide by 10 + 3 root words? :confused: Besides, so many things in our daily lives have both unit scales. My ruler has inches and cm and mm. Bathroom scales have pounds and kg. Even measuring cups have ml written on them.
You could be right for international commerce where values have to be recalculated just for the US, but like I said, I think those things should be converted. I don't really care if I buy a 25 gram candy bar as opposed to a 1 ounce candy bar or a 350ml can of soda.
Perhaps true, but just because you switch to metric, doesn't mean you need to stop using tablespoons and teaspoons for measurements. It's all an approximation anyway, since there are far more than 2 different spoon sizes, and many of them look like they're pretty much equal in size to a tablespoon.
I'm sorry, but which tablespoons do you use that aren't tablespoons? The measuring spoons most people have at home for baking are very precise and have the fractions clearly marked on them.
Other than that, there's a teaspoon, tablespoon, and serving spoon (which you wouldn't use as a measurement). The sizes are very different for each of those and I don't think anyone who saw them side by side could confuse them.
So if you're cooking, do what everyone else does with their spoons; if you need a tablespoon, grab the big-ish one and estimate. If you needed more precision than that, why wouldn't you use ml? :confused:
Because it's a heck of a lot easier to think, "I need one xspoon of secret ingredient" than it is to think, "I need xml of secret ingredient." You think like a scientist (because you are one). Most people aren't. That's who the teaspoons and tablespoons are for.
It doesn't matter what normal body temperature is because that's not what people are looking for when they take a temperature; they're looking for what's not normal. If it can be helped, the number one is seeking should be as flat as possible.
There is a distinctive quality about 100 that is special. It represents an additional place value and is a line of demarcation for most people. For a scientist or professional, the numbers seem the same (each with 3 digits ending in the tenths place), but to the lay user they are very different. The average person doesn't know what significant digits are or when rounding is appropriate. It's far more likely that someone will falsely remember "37.2" as "37" than they will "99" as "98.6." Even if they do make an error and think of 98.6 as 99, it is an error on the side of caution (because presumably they will take their child to the doctor or at least call in).
I realize this makes me seem like I put people in low regard, but the fact is that most things designed for common use are meant to be idiot-proof. Redundancies and warnings are hard to miss in such designs, and on a temperature scale, one that makes 100 "dangerous" is very practical and effective. You have to keep in mind that this scale is going to be used by the illiterate, functionally illiterate, the negligent, the careless, the sloppy, and the hurried.
The importance of additional digits finds its way into many facets of life, including advertising and pricing. It essentially the only reason why everything is sold at intervals of "xx.99" instead of a flat price point. Marketers have long determined that if they were to round up to the nearest whole number, it would make the price seem disproportionately larger. The same "trick" is being used by the Fahrenheit scale; the presence of the additional digit makes people more alarmed at the appropriate time.
Perhaps your set of measuring cups is the additional piece of equipment. Indeed you wouldn't need them. For a recipe in SI, the only items you would need are an electronic balance, graduating measuring "cup," and a graduated cylinder. No series of cups or spoons required (although, they do of course come in metric for those so inclined).
Of course any amateur baker has at least a few cups of both wet and dry so they can keep ingredients separated but measured when they need to be added in a precise order. It just isn't practical to bake with 3 measuring devices and a scale (which, let's be real here, would cost 5 times as much as a set of measuring cups).
This also relies on having recipes with written weights as opposed to volumes. It would also be problematic because you'd make people relearn common measurements for the metric beaker because they couldn't have their cups (ie I know 1 egg is half a cup, so it's easy to put half an egg in a recipe-I would have to do milimeter devision to figure this out for a metric recipe even though there's a perfectly good standard device for it).
It might seem that way to you, but the majority of the world uses weight to measure dry ingredients. For them it's just as easy.
Sure when you have a commercial quantity (which is also how companies bake in bulk-by weight), but not when you're making a dozen muffins or cupcakes. The smaller the quantity, the worse off you are with weighing each ingredient in terms of efficiency.
Why would you need alternative names? A recipe would call for "30ml" of any given liquid. There's no need to call it anything else.
So what would you call 500ml of beer at a bar? Would everyone refer to the spoon at the dinner table as "the 30?" The naming convention isn't going to disappear just because measurements are given in metric. Or are you saying that the naming convention should disappear and numbers used exclusively in their stead?
Well, no one would ask for a 237ml vessel because that's an arbitrary number based on a different system of units. But if you wanted, yes, you could measure that amount in a graduated measuring cup (or weigh it on your balance).
In that case, what would I call 1 cup of a drink? Even if it is made flat at 200, 250, or 300ml, what would be the name? I think by and large it would still be called a cup. In that case you aren't really accomplishing much because people are going to refer to it as they will and the metric quantity wouldn't really do anything because it's not something that people usually divide or multiply by 10 very often in daily life.
I suspect people would call it a "quarter liter," much like I would say "quarter gallon."
No, that would be 1/4 of a liter, not 4 liters. I'm assuming that without gallons, the most closely analogous metric quantity would be 4 liters. What would be the marketing term for this? The shorthand name that would allow people to express a quantity without referring to another number?
And no, you wouldn't call 500ml a "pint" because, well, why would you? :confused:
Well I'm assuming that beer would have to be served in metric quantities, and a pint is known the world over as a beer. You can't really expect the name to go out of use just because the quantity has changed by a factor of about 25ml.
...But countries using SI do call 500ml a demi-liter ("demi" meaning "half").
Somehow I don't see that becoming popular pub lingo...
This is the case with Si units as well. 500, 250, 125, 75, etc. Though SI units can also be divided by any number you wish. Want to make 1/5 of the recipe? ...Just divide all the numbers by five.
Except you can't divide the servings people usually take for themselves very easily by 2, 4, 8, or 16. An eighth of 300ml (a hypothetical metric cup), for example, is a decimal. It's not very probable that if someone was to describe how much cream they added to their coffee they'd describe it as "37.5ml." It's more likely that they'll say "1/4 of x" or "2 of y." This is how the standard system was born; people took everyday quantities (often times as random as fists, feet, and gulps) and over time standardized them.
Every standard unit conforms to a value we are likely to see to this day (a man's foot is still about 12 inches, a tablespoon is about one bite, etc). Granted it's not scientific, but it's not meant to be. It's meant to be practical to describe everyday units, much like "lion" is not the full scientific name for panthera leo. One naming scheme makes sense for one application and another makes sense for a very different application. I whole heartedly agree that for scientific, industrial, and official uses metric is the way to go, but it is not the way to go for lay people. People are not scientists. They should use the measuring schemes that are practical for the things in their lives.
Not that OS X Panthera Leo doesn't have a nice ring to it, of course. ;)
No, but it is onerous for kids to learn SI units, which is a mandatory skill in this global world. Like I said, why teach kids two units of measure if one will suffice?
It's onerous to learn how to multiply and divide by 10 + 3 root words? :confused: Besides, so many things in our daily lives have both unit scales. My ruler has inches and cm and mm. Bathroom scales have pounds and kg. Even measuring cups have ml written on them.
You could be right for international commerce where values have to be recalculated just for the US, but like I said, I think those things should be converted. I don't really care if I buy a 25 gram candy bar as opposed to a 1 ounce candy bar or a 350ml can of soda.
Perhaps true, but just because you switch to metric, doesn't mean you need to stop using tablespoons and teaspoons for measurements. It's all an approximation anyway, since there are far more than 2 different spoon sizes, and many of them look like they're pretty much equal in size to a tablespoon.
I'm sorry, but which tablespoons do you use that aren't tablespoons? The measuring spoons most people have at home for baking are very precise and have the fractions clearly marked on them.
Other than that, there's a teaspoon, tablespoon, and serving spoon (which you wouldn't use as a measurement). The sizes are very different for each of those and I don't think anyone who saw them side by side could confuse them.
So if you're cooking, do what everyone else does with their spoons; if you need a tablespoon, grab the big-ish one and estimate. If you needed more precision than that, why wouldn't you use ml? :confused:
Because it's a heck of a lot easier to think, "I need one xspoon of secret ingredient" than it is to think, "I need xml of secret ingredient." You think like a scientist (because you are one). Most people aren't. That's who the teaspoons and tablespoons are for.
dba7dba
Apr 18, 05:18 PM
Good, so let LG sue Apple. Just one problem: the iPhone doesn't actually look like the Prada. At all.
SInce you obviously don't want to leave macrumors screen to see the image of LG Prada, please look at post #242. Pic is embedded.
SInce you obviously don't want to leave macrumors screen to see the image of LG Prada, please look at post #242. Pic is embedded.
NT1440
Mar 30, 11:00 PM
Well said. I think Mac OS X Lion is a game changer. I am very impressed with it.
Definitely. The naysayers are seriously upset about features they don't have to use (but probably will end up loving anyway)? Come on.
If anything Lion brings a different "feel" to the use of the mac, and as Apple has been showing almost continuously for 30+ years now, its the experience that get people hooked.
Definitely. The naysayers are seriously upset about features they don't have to use (but probably will end up loving anyway)? Come on.
If anything Lion brings a different "feel" to the use of the mac, and as Apple has been showing almost continuously for 30+ years now, its the experience that get people hooked.
drakino
Apr 5, 01:55 PM
2010 - Apple Loses #1 Mobile OS spot to Android OS
2011 - Apple pisses off their JB customers and loses 10% more
2012 - Apple loses #2 and #3 spot to Windows Mobile & HP OS
Within 12 months Apple will own the same market share as their computers, 9% ... and it'll have been the same story: rose to glory, abuse the customer and business partners, people get sick of the rulebook and leave for more open pastures.
This is all deja vu from the 80s repeating itself, wow.
I dumped iPhone at xmas, now I'll likely dump iPad 2 if this trend continues. If they really push the washington involvement to stop jailbreaking, I'll get rid of my 3 iMac\MB Air\MB Pro... I don't support companies who attack me. They're here because of me, not the opposite. If they don't get that, adios.
2010 - Wrong. Mobile OS implies iOS, and all the stats ignore the iPad and iPod Touch. Apple is behind Android only in mobile phone side, and not by much when looking at a world view.
2011 - I know a number of people who are in that 10% of jailbreakers, and they would still stick with Apple even if it was closed off. They enjoy the tinkering, but understand that they are hacking into their devices via exploits that Apple has a responsibility to close from a security standpoint.
2012 - Doubtful. Windows Mobile share of the market is still dropping even with WP7. Microsoft is likely to mismanage WP7 just like their other products. WebOS? It's practically dead right now, and would take a lot for it to approach anywhere near iOS next year.
Apple is still very much focused on the consumer. Yes, they control their environment well, but your particular complaint is a no win situation for them. They could ignore jailbreaking, leaving security exploits in the OS, and people would bash them for poor security. But if they close those exploits, people complain their freedom is being taken away, or being attacked. Yes, Apple could allow more customization, and other features jailbreaking brings. But it would require engineering time, and that time is currently being spent on trying to keep the platform advancing to stay competitive. It's all about priorities, and I think we all here can agree a better notification system and other nagging iOS issues are much higher on the list then letting people skin the screen with Scion icons.
2011 - Apple pisses off their JB customers and loses 10% more
2012 - Apple loses #2 and #3 spot to Windows Mobile & HP OS
Within 12 months Apple will own the same market share as their computers, 9% ... and it'll have been the same story: rose to glory, abuse the customer and business partners, people get sick of the rulebook and leave for more open pastures.
This is all deja vu from the 80s repeating itself, wow.
I dumped iPhone at xmas, now I'll likely dump iPad 2 if this trend continues. If they really push the washington involvement to stop jailbreaking, I'll get rid of my 3 iMac\MB Air\MB Pro... I don't support companies who attack me. They're here because of me, not the opposite. If they don't get that, adios.
2010 - Wrong. Mobile OS implies iOS, and all the stats ignore the iPad and iPod Touch. Apple is behind Android only in mobile phone side, and not by much when looking at a world view.
2011 - I know a number of people who are in that 10% of jailbreakers, and they would still stick with Apple even if it was closed off. They enjoy the tinkering, but understand that they are hacking into their devices via exploits that Apple has a responsibility to close from a security standpoint.
2012 - Doubtful. Windows Mobile share of the market is still dropping even with WP7. Microsoft is likely to mismanage WP7 just like their other products. WebOS? It's practically dead right now, and would take a lot for it to approach anywhere near iOS next year.
Apple is still very much focused on the consumer. Yes, they control their environment well, but your particular complaint is a no win situation for them. They could ignore jailbreaking, leaving security exploits in the OS, and people would bash them for poor security. But if they close those exploits, people complain their freedom is being taken away, or being attacked. Yes, Apple could allow more customization, and other features jailbreaking brings. But it would require engineering time, and that time is currently being spent on trying to keep the platform advancing to stay competitive. It's all about priorities, and I think we all here can agree a better notification system and other nagging iOS issues are much higher on the list then letting people skin the screen with Scion icons.
coder12
Mar 29, 04:12 PM
gynecologist?? :D
Ummmmm... haha, possibly? :D
Ummmmm... haha, possibly? :D
OdduWon
Sep 15, 05:22 PM
single 3ghz woodcrest MBP's next tuesday? drool..........
SilianRail
Apr 21, 02:31 PM
9-5 Mac has been killing it lately.
iansilv
May 7, 10:09 AM
Honestly, I am about to not renew. It's just not that useful. The only thing I would keep it for is the online idisk, and with dropbox or novadrive coming up with better and cheaper alternatives, I see no reason to continue to use it. However, if Apple makes it free, then they can use that as another feature of their products in general. They could sell the idisk storage, or give away 5 gigs or something, like drop box does.
Rt&Dzine
Apr 16, 12:33 PM
:mad::mad::mad: I am seriously starting to get pissed.
9 Things the Rich Don't Want You To Know About Taxes (http://www.wweek.com/portland/print-article-17350-print.html)
It's a long article so here are some excerpts;
WTF does someone even do with 9 billion dollars?
Don't you remember, it trickles down? Key points from your article.
1. Poor Americans do pay taxes.
2. The wealthiest Americans don�t carry the burden.
Contrary to what Rand Paul says. The income tax is less than half of federal taxes and only one-fifth of taxes at all levels of government.
3. In fact, the wealthy are paying less taxes.
4. Many of the very richest pay no current income taxes at all.
5. And (surprise!) since Reagan, only the wealthy have gained significant income.
6. When it comes to corporations, the story is much the same�less taxes.
7. Some corporate tax breaks destroy jobs.
Due to loopholes and tax havens like the Cayman Islands. Average incomes fell during Bush years.
8. Republicans like taxes too.
President Reagan signed into law 11 tax increases, targeted at people down the income ladder. George W. Bush signed a tax increase, too, in despite his written ironclad pledge never to raise taxes on anyone.
9. Other countries do it better.
9 Things the Rich Don't Want You To Know About Taxes (http://www.wweek.com/portland/print-article-17350-print.html)
It's a long article so here are some excerpts;
WTF does someone even do with 9 billion dollars?
Don't you remember, it trickles down? Key points from your article.
1. Poor Americans do pay taxes.
2. The wealthiest Americans don�t carry the burden.
Contrary to what Rand Paul says. The income tax is less than half of federal taxes and only one-fifth of taxes at all levels of government.
3. In fact, the wealthy are paying less taxes.
4. Many of the very richest pay no current income taxes at all.
5. And (surprise!) since Reagan, only the wealthy have gained significant income.
6. When it comes to corporations, the story is much the same�less taxes.
7. Some corporate tax breaks destroy jobs.
Due to loopholes and tax havens like the Cayman Islands. Average incomes fell during Bush years.
8. Republicans like taxes too.
President Reagan signed into law 11 tax increases, targeted at people down the income ladder. George W. Bush signed a tax increase, too, in despite his written ironclad pledge never to raise taxes on anyone.
9. Other countries do it better.
newcronos
Apr 8, 09:07 AM
Stay classy, Steve :p
shervieux
May 8, 10:15 PM
This is easy to see
MobilMe Becomes Free
MobilMe gets laden with 1Ads
All part of the Apple strategy
I would be happy to keep paying $99/year for adfree Mobilme
I agree with that. I would keep paying $99 a year for no ads. I am a Christian Minister and the last thing I want is ads on my website. I once belonged to a church that opted for free web hosting. They immediately cancelled when ads for beer, sports illustrated swimsuit, and playboy started appearing in banners.
MobilMe Becomes Free
MobilMe gets laden with 1Ads
All part of the Apple strategy
I would be happy to keep paying $99/year for adfree Mobilme
I agree with that. I would keep paying $99 a year for no ads. I am a Christian Minister and the last thing I want is ads on my website. I once belonged to a church that opted for free web hosting. They immediately cancelled when ads for beer, sports illustrated swimsuit, and playboy started appearing in banners.
